You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Error on matrix camera gantry between jnc 9 and 10 M27 E bound

Reported via mobile in the Electronic Sign (NH) category anonymously at 23:24, Thursday 6 February 2025

Sent to National Highways less than a minute later. FixMyStreet ref: 7098809.

The first set of cameras on gantry between jnc 9-10 East bound M27 are not displaying change in variable speed limit. The signs show lane closure ahead however no change in speed limit. Numerous cars have just been flashed by enforcement cameras unfairly. The following gantry has both speed reduction to 50mph and lane closure and one after that has 40 ahead of contractors on road placing Out signs. First matrix however has partial Warnings displayed. Many unfairly will receive enforcement fines - needs checking

Updates

  • I also have been flashing by this camera! Seems like every couple of months this exact same camera has problems

    Posted anonymously at 23:38, Friday 7 February 2025

  • Hi, I was travelling on the M27 westbound today and noticed the speed camera flashing repeatedly for all vehicles. In my rear-view mirror, it appeared to be triggering continuously for all passing traffic, regardless of speed. This may indicate a potential fault with the camera. Just thought I’d bring it to your attention. Thank you.

    Posted anonymously at 16:37, Sunday 20 April 2025

Provide an update

Please note that updates are not sent to National Highways. Your information will only be used in line with our privacy policy

Next: Tell us about you

Your update

Tell us about you

Do you have a National Highways Report a problem password?